​What Should I Do With The Inner Hexagon Screw Slide?

The screw thread cannot be disassembled, whether it is an inner hexagon or an outer hexagon, a slot or a cross groove, if you want to take out the screw of the sliding thread, there are generally three plans you can try.

1. There is a thing called "broken screw extractor" that can be found and tried.

2. Use an alloy drill that is one size smaller than the sliding screw to drill off the sliding screw, and there will be some thin-walled residues around the periphery, which can be removed slowly.

3. It can be treated by EDM. If the workpiece is not easy to move, there is a portable EDM machine that can be found.

Using the above method to take out the screw of the sliding wire may damage the internal thread of the original threaded hole:

1. If the damage is slight, the standard tap of the corresponding thread standard can be used for a while and it can still be used normally.

2. If the damage is serious, under the premise that the peripheral wall thickness of the threaded hole allows, it can be considered to further use the product of "steel wire screw sleeve" for correction, and the strength of "steel wire screw sleeve" will not be affected or may be greater than Original thread strength and still using original standard bolts.